Honestly there is no play in my bench so I wouldn’t be surprised if it doesn’t need bolts at all? We shall see. 
Jeff

Sent from my iPhone

> On Aug 22, 2020, at 12:31 PM, Eric Caron <ericcaron96@comcast.net> wrote:
> 
> Hi Jeff,
> 
> I look forward to other’s replying. 
> 
> My bench may not have been a original Westfalia but it has the sliding rails.  I actually have two benches a brown and a grey. 
> 
> In order to fit I took off the arm rest that would have gone against the stove side of the van.  This let the seat move in a bit and I could then line up a bolt or two in the track.
> 
> I suspect there were special bolts that were never passed on to me.  The bolts that hold on the rail covers seem a bit short and don’t match up for me.  Still I was able to get a couple to go in and keep the seat from sliding left to right. Forward and back is secured by the rails. 
> With the arm rest off the slider just fit with enough room to wiggle in a securing bolt. 
> 
> Look forward to learning more from your post and the replies.
> 
> Eric Caron 
> 85 GL currently with engine and transmission out and front end coming together.
> 
> 
> 
> 
> 
>> On Aug 22, 2020, at 1:11 PM, Jeff Palmer <w.jeff.palmer@ICLOUD.COM> wrote:
>> 
>> Taking two extra kids to the cottage. How does the two person bench the slides into the Westfalia tracks get secured? Or does it?
>> 
>> Thanks
>> Jeff
>> 85 Westfalia
>> 
>> Sent from my iPhone
>